Measures against resin powder bridges - List of Manufacturers, Suppliers, Companies and Products

Measures against resin powder bridges Product List

1～3 item / All 3 items

Displayed results

0249 Bridge measures for synthetic resin powder with high moisture content

This is an introduction to case studies on bridge measures for synthetic resin powder with high moisture content.

In this case, the user created an acrylic scale-down size hopper and visually confirmed the fluidization of the powder using a Bro-Disk before applying it to the actual machine. Such cases are rare, but we are pleased that the internal flow of the powder in the hopper was visually confirmed, allowing the customer to understand the effectiveness of our bridge breaker, the Bro-Disk. [Consultation from a certain chemical manufacturer] It has been reported that issues with bridging in the existing plant have frequently occurred, causing troubles. This time, they contacted us regarding the expansion of the plant. (Target Hopper) Type: 2-axis screw feeder hopper Approximate dimensions: 2000×1200 (Material) Name: Synthetic resin powder Bulk density: 0.4-0.6 Particle size: Approximately 500μm Angle of repose: 70° (strong bridging) Moisture content: 30% (Specification air pressure) 0.4 MPa *For more details, please contact us or download the catalog.

Company：ミナギ
Price：Other

Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0569 Measures for bridge issues with resin powder

Eliminating the bridge after adding water! A case where the problem was solved with a Brody disk.

This is an inquiry from a chemical plant regarding bridge-related issues, and it is a case where the problem was resolved using this equipment. 【Overview】 ■Trouble Details and Background 1. Bridges occasionally occur. 2. The frequency of the above is low, and when a bridge occurs, it is dealt with by poking it with a stick, etc. 3. Static electricity became severe, leading to the addition of water to the material. 4. Due to the bridge, it became impossible to discharge powder from the hopper. 5. The use of a blow disk resolved the bridge after adding water. ■Hopper Conditions - Dimensions: Approximately 3000×1500 - Discharge Section: Approximately 1500×350 - Discharge Device: Screw feeder ■Blow Disk Arrangement and Control - Installed in three tiers (upper, middle, lower) on the inclined part of the hopper (four sides). - A total of 36 blow disks are divided into nine locations with four each, activated with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0164 At a sports equipment manufacturer, measures against bridge formation of synthetic resin powder.

A case where a bridge occurred due to the newly used resin material!

At the domestic factory of a sports equipment manufacturer, a bridge occurred due to a newly used resin material. As a countermeasure, we introduced the bridge breaker. After reviewing the hopper diagram, we provided guidance on model selection and recommended installation positions, followed by the loan of the relevant model, leading to its introduction. [Overview] ■ Shape: Conical ■ Diameter: 500φ ■ Hopper Inclination: Approximately 60° [Key Points of This Equipment] ■ The elastic disk (silicone) is very important in terms of the risk of foreign material contamination, as well as strength and durability. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.